BackTrack / KaliLinux. Задай вопрос - получи ответ

Discussion in 'Linux, Freebsd, *nix' started by Freedom, 25 Nov 2008.

  1. erwerr2321

    erwerr2321 Elder - Старейшина

    Joined:
    19 Jun 2015
    Messages:
    4,236
    Likes Received:
    26,249
    Reputations:
    148
    а какой вывод после airmon-ng?
    или как ты преводишь модуль в Monitor mode?
     
  2. erwerr2321

    erwerr2321 Elder - Старейшина

    Joined:
    19 Jun 2015
    Messages:
    4,236
    Likes Received:
    26,249
    Reputations:
    148
    а может ты пробел потерял? :)

    airodump-ng -c * --bssid ************ -w /root/desktop/ wlan0mon
     
    Darkside likes this.
  3. Darkside

    Darkside New Member

    Joined:
    16 Feb 2018
    Messages:
    7
    Likes Received:
    0
    Reputations:
    0
    Да, я потерял пробел:D Чтоб я без Тебя делал:D Хай тобі Бог дає здоровья! Спасибо большое за помощь!
     
  4. Night-Hunter

    Night-Hunter New Member

    Joined:
    29 Sep 2017
    Messages:
    5
    Likes Received:
    0
    Reputations:
    0
    Всем привет. Не работает почему Wireshark и Zenmap на Kali 2018.1. При нажатии на ярлык - ничего не происходит, при попытке запуска через консоль - следующие ошибки
    Zenmap
    Code:
    Could not import the zenmapGUI.App module: '/usr/lib/x86_64-linux-gnu/libharfbuzz.so.0: undefined symbol: FT_Get_Var_Blend_Coordinates'.
    I checked in these directories:
        /usr/bin
        /usr/lib/python2.7
        /usr/lib/python2.7/plat-x86_64-linux-gnu
        /usr/lib/python2.7/lib-tk
        /usr/lib/python2.7/lib-old
        /usr/lib/python2.7/lib-dynload
        /usr/local/lib/python2.7/dist-packages
        /usr/local/lib/python2.7/dist-packages/PIL
        /usr/lib/python2.7/dist-packages
        /usr/lib/python2.7/dist-packages/PILcompat
        /usr/lib/python2.7/dist-packages/gtk-2.0
        /usr/lib/python2.7/dist-packages/wx-3.0-gtk2
    If you installed Zenmap in another directory, you may have to add the
    modules directory to the PYTHONPATH environment variable.
    Wireshark
    Code:
    wireshark: symbol lookup error: /usr/lib/x86_64-linux-gnu/libQt5XcbQpa.so.5: undefined symbol: FT_Property_Set
    Wireshark from root
    Code:
    QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
    wireshark: symbol lookup error: /usr/lib/x86_64-linux-gnu/libQt5XcbQpa.so.5: undefined symbol: FT_Property_Set

     
  5. 3acuson

    3acuson Member

    Joined:
    31 Jan 2010
    Messages:
    426
    Likes Received:
    5
    Reputations:
    0
    Доброй ночи ачатовцы, возникла у меня проблемка :) детская но решить не могу.
    Поставил кали на virtualbox нужно сделать backconnect к виртуалке через шелл на одном сайте, в терминале пишу nc -lvnp 80 но при бекке соединение не происходит на основной ОС все работает , как пробросить порты на виртуалку? туториалы меня не спасли по пробросу портов
     
  6. Matrix001

    Matrix001 Active Member

    Joined:
    18 Aug 2016
    Messages:
    262
    Likes Received:
    146
    Reputations:
    3
    И так, в настройках поменяй адаптер в VirtualBox.
     
  7. 3acuson

    3acuson Member

    Joined:
    31 Jan 2010
    Messages:
    426
    Likes Received:
    5
    Reputations:
    0
    Поменял на свой сетевой адаптер сеть вобще в виртуалке пропала, включаю обратно NAT все работает кроме reverse shella
     
  8. rooker

    rooker New Member

    Joined:
    14 Dec 2017
    Messages:
    57
    Likes Received:
    2
    Reputations:
    0
    Кто-нибудь знает как обновить драйвера для USB порта в Kali linux(оффлайн)?
     
  9. uCryNet

    uCryNet Member

    Joined:
    11 Mar 2012
    Messages:
    53
    Likes Received:
    13
    Reputations:
    5
    Зачем обновлять драйвер на USB порт?
     
  10. rooker

    rooker New Member

    Joined:
    14 Dec 2017
    Messages:
    57
    Likes Received:
    2
    Reputations:
    0
    Так посоветовал мне здесь один товарищ (его к сожалению забанили) здесь по его мнению это надо чтобы коккертно установить wifi карту Atheros Ar9380 Ar5BXB112 - в противном случае Kali linux не видит данную карты (а винда XP Pro SP3 видит)
     
  11. binarymaster

    binarymaster Elder - Старейшина

    Joined:
    11 Dec 2010
    Messages:
    4,717
    Likes Received:
    10,195
    Reputations:
    126
    Видимо не просто так забанили его. :)
     
    uzeerpc and Veil like this.
  12. uCryNet

    uCryNet Member

    Joined:
    11 Mar 2012
    Messages:
    53
    Likes Received:
    13
    Reputations:
    5
    Правильно сделали, что забанили. У вашей Wi-Fi карты интерфейс PCI Express. То есть USB здесь вообще ни причем.
     
  13. rooker

    rooker New Member

    Joined:
    14 Dec 2017
    Messages:
    57
    Likes Received:
    2
    Reputations:
    0
    Хорошо, а как же мне заставить Kali linux увидеть данную карточку (доступа в интернет на той машине у меня нет поэтому конструкции типа apt-get... здесь не катят)?
    Для справки ноут Acer Aspire 5600AWLMI (карточка установлена вместо штатной от intel (штатную карточку Kali Linux видела, но она слабая)
     
  14. KaliNoob

    KaliNoob New Member

    Joined:
    18 Jan 2018
    Messages:
    26
    Likes Received:
    1
    Reputations:
    0
    Всем привет! Подскажите как сделать второго не root пользователя в kali linux и что бы между ними можно было переключатся из консоли (как на whonix) без перезагрузок и тд тп.
     
  15. rooker

    rooker New Member

    Joined:
    14 Dec 2017
    Messages:
    57
    Likes Received:
    2
    Reputations:
    0
    Неужели никто не может мне помочь? Я уже писал выше нужно пошаговое описание установки ath9k на kali linux для wifi mpciex карты Atheros чипar9380 AR5BXB112 c учетом отсутствия интернета на ноуте. Kali linu[ эту карту не видит. Вот вывод команд lspci

    Обычный вывод lspci (без параметров)
    00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
    00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
    00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
    00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
    00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02)
    00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
    00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02)
    00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
    00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
    00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
    00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
    00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
    00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
    00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
    00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
    01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI M52 [Mobility Radeon X1300]
    02:00.0 Ethernet controller: Atheros Communications Inc. Device abcd (rev 01)
    0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    0a:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
    0a:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
    0a:09.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller



    Вывод lspsi vvx
    00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
    Subsystem: Acer Incorporated [ALI] Device 0102
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: [e0] Vendor Specific Information: Len=09 <?>
    00: 86 80 a0 27 06 00 90 20 03 00 00 06 00 00 00 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 02 01
    30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00

    00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 00002000-00002fff
    Memory behind bridge: c8100000-c81fffff
    Prefetchable memory behind bridge: 00000000d0000000-00000000d7ffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [88] Subsystem: Acer Incorporated [ALI] Device 0102
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Address: fee0100c Data: 41a1
    Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    ExtTag- RBE- FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
    ClockPM- Surprise- LLActRep- BwNot-
    LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
    Slot #1, PowerLimit 75.000W; Interlock- NoCompl-
    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
    Control: AttnInd Off, PwrInd On, Power- Interlock-
    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
    Changed: MRL- PresDet+ LinkState-
    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    RootCap: CRSVisible-
    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [100 v1] Virtual Channel
    Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
    Arb: Fixed+ WRR32- WRR64- WRR128-
    Ctrl: ArbSelect=Fixed
    Status: InProgress-
    VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
    Status: NegoPending- InProgress-
    Capabilities: [140 v1] Root Complex Link
    Desc: PortNumber=02 ComponentID=01 EltType=Config
    Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
    Addr: 00000000fed19000
    Kernel driver in use: pcieport
    00: 86 80 a1 27 07 04 10 00 03 00 04 06 10 00 01 00
    10: 00 00 00 00 00 00 00 00 00 01 01 00 20 20 00 20
    20: 10 c8 10 c8 01 d0 f1 d7 00 00 00 00 00 00 00 00
    30: 00 00 00 00 88 00 00 00 00 00 00 00 0b 01 1c 00

    00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
    Subsystem: Acer Incorporated [ALI] Device 0102
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 29
    Region 0: Memory at c8000000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Address: 00000000fee0100c Data: 4192
    Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    ExtTag- RBE- FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
    ClockPM- Surprise- LLActRep- BwNot-
    LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
    Capabilities: [100 v1] Virtual Channel
    Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
    Arb: Fixed- WRR32- WRR64- WRR128-
    Ctrl: ArbSelect=Fixed
    Status: InProgress-
    VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
    Status: NegoPending- InProgress-
    VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
    Status: NegoPending- InProgress-
    Capabilities: [130 v1] Root Complex Link
    Desc: PortNumber=0f ComponentID=02 EltType=Config
    Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
    Addr: 00000000fed1c000
    Kernel driver in use: snd_hda_intel
    00: 86 80 d8 27 06 04 10 00 02 00 03 04 10 00 00 00
    10: 04 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 02 01
    30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00

    00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 00004000-00004fff
    Memory behind bridge: c0000000-c02fffff
    Prefetchable memory behind bridge: 00000000c0300000-00000000c04fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
    ExtTag- RBE- FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
    ClockPM- Surprise- LLActRep+ BwNot-
    LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
    Slot #2, PowerLimit 6.500W; Interlock- NoCompl-
    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
    Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
    Changed: MRL- PresDet- LinkState-
    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    RootCap: CRSVisible-
    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Address: fee0100c Data: 41c1
    Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 0102
    Capabilities: [a0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Virtual Channel
    Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
    Arb: Fixed+ WRR32- WRR64- WRR128-
    Ctrl: ArbSelect=Fixed
    Status: InProgress-
    VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
    Status: NegoPending- InProgress-
    VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
    Status: NegoPending- InProgress-
    Capabilities: [180 v1] Root Complex Link
    Desc: PortNumber=01 ComponentID=02 EltType=Config
    Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
    Addr: 00000000fed1c001
    Kernel driver in use: pcieport
    00: 86 80 d0 27 07 04 10 00 02 00 04 06 10 00 81 00
    10: 00 00 00 00 00 00 00 00 00 02 02 00 40 40 00 20
    20: 00 c0 20 c0 31 c0 41 c0 00 00 00 00 00 00 00 00
    30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 04 00

    00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    I/O behind bridge: 00005000-00005fff
    Memory behind bridge: c0500000-c06fffff
    Prefetchable memory behind bridge: 00000000c0700000-00000000c08fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
    ExtTag- RBE- FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
    ClockPM- Surprise- LLActRep+ BwNot-
    LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
    Slot #3, PowerLimit 6.500W; Interlock- NoCompl-
    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
    Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
    Changed: MRL- PresDet- LinkState-
    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    RootCap: CRSVisible-
    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Address: fee0100c Data: 41d1
    Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 0102
    Capabilities: [a0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Virtual Channel
    Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
    Arb: Fixed+ WRR32- WRR64- WRR128-
    Ctrl: ArbSelect=Fixed
    Status: InProgress-
    VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
    Status: NegoPending- InProgress-
    VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
    Status: NegoPending- InProgress-
    Capabilities: [180 v1] Root Complex Link
    Desc: PortNumber=02 ComponentID=02 EltType=Config
    Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
    Addr: 00000000fed1c001
    Kernel driver in use: pcieport
    00: 86 80 d2 27 07 04 10 00 02 00 04 06 10 00 81 00
    10: 00 00 00 00 00 00 00 00 00 03 03 00 50 50 00 20
    20: 50 c0 60 c0 71 c0 81 c0 00 00 00 00 00 00 00 00
    30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 02 04 00

    00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    I/O behind bridge: 00006000-00006fff
    Memory behind bridge: c0900000-c0afffff
    Prefetchable memory behind bridge: 00000000c0b00000-00000000c0cfffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
    ExtTag- RBE- FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
    ClockPM- Surprise- LLActRep+ BwNot-
    LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
    Slot #4, PowerLimit 6.500W; Interlock- NoCompl-
    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
    Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
    Changed: MRL- PresDet- LinkState-
    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    RootCap: CRSVisible-
    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Address: fee0100c Data: 4122
    Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 0102
    Capabilities: [a0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Virtual Channel
    Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
    Arb: Fixed+ WRR32- WRR64- WRR128-
    Ctrl: ArbSelect=Fixed
    Status: InProgress-
    VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
    Status: NegoPending- InProgress-
    VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
    Status: NegoPending- InProgress-
    Capabilities: [180 v1] Root Complex Link
    Desc: PortNumber=03 ComponentID=02 EltType=Config
    Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
    Addr: 00000000fed1c001
    Kernel driver in use: pcieport
    00: 86 80 d4 27 07 04 10 00 02 00 04 06 10 00 81 00
    10: 00 00 00 00 00 00 00 00 00 04 04 00 60 60 00 20
    20: 90 c0 a0 c0 b1 c0 c1 c0 00 00 00 00 00 00 00 00
    30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 03 04 00

    00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
    I/O behind bridge: 00007000-00007fff
    Memory behind bridge: c0d00000-c0efffff
    Prefetchable memory behind bridge: 00000000c0f00000-00000000c10fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
    ExtTag- RBE- FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
    ClockPM- Surprise- LLActRep+ BwNot-
    LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
    Slot #5, PowerLimit 6.500W; Interlock- NoCompl-
    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
    Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
    Changed: MRL- PresDet- LinkState-
    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    RootCap: CRSVisible-
    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
    Address: fee0100c Data: 4152
    Capabilities: [90] Subsystem: Acer Incorporated [ALI] Device 0102
    Capabilities: [a0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Virtual Channel
    Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
    Arb: Fixed+ WRR32- WRR64- WRR128-
    Ctrl: ArbSelect=Fixed
    Status: InProgress-
    VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
    Status: NegoPending- InProgress-
    VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
    Status: NegoPending- InProgress-
    Capabilities: [180 v1] Root Complex Link
    Desc: PortNumber=04 ComponentID=02 EltType=Config
    Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
    Addr: 00000000fed1c001
    Kernel driver in use: pcieport
    00: 86 80 d6 27 07 04 10 00 02 00 04 06 10 00 81 00
    10: 00 00 00 00 00 00 00 00 00 05 05 00 70 70 00 20
    20: d0 c0 e0 c0 f1 c0 01 c1 00 00 00 00 00 00 00 00
    30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 04 00

    00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Acer Incorporated [ALI] Device 0102
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 23
    Region 4: I/O ports at 1800
    Kernel driver in use: uhci_hcd
    00: 86 80 c8 27 05 00 80 02 02 00 03 0c 00 00 80 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 01 18 00 00 00 00 00 00 00 00 00 00 25 10 02 01
    30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00

    00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Acer Incorporated [ALI] Device 0102
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 19
    Region 4: I/O ports at 1820
    Kernel driver in use: uhci_hcd
    00: 86 80 c9 27 05 00 80 02 02 00 03 0c 00 00 00 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 21 18 00 00 00 00 00 00 00 00 00 00 25 10 02 01
    30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00

    00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Acer Incorporated [ALI] Device 0102
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 18
    Region 4: I/O ports at 1840
    Kernel driver in use: uhci_hcd
    00: 86 80 ca 27 05 00 80 02 02 00 03 0c 00 00 00 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 41 18 00 00 00 00 00 00 00 00 00 00 25 10 02 01
    30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00

    00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Acer Incorporated [ALI] Device 0102
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin D routed to IRQ 16
    Region 4: I/O ports at 1860
    Kernel driver in use: uhci_hcd
    00: 86 80 cb 27 05 00 80 02 02 00 03 0c 00 00 00 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 61 18 00 00 00 00 00 00 00 00 00 00 25 10 02 01
    30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00

    00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
    Subsystem: Acer Incorporated [ALI] Device 0102
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 23
    Region 0: Memory at c8004000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Kernel driver in use: ehci-pci
    00: 86 80 cc 27 06 00 90 02 02 20 03 0c 00 00 00 00
    10: 00 40 00 c8 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 02 01
    30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00

    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Bus: primary=00, secondary=0a, subordinate=0e, sec-latency=56
    I/O behind bridge: 00003000-00003fff
    Memory behind bridge: c8300000-c83fffff
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [50] Subsystem: Acer Incorporated [ALI] Device 0102
    00: 86 80 48 24 07 00 10 00 e2 01 04 06 00 00 01 00
    10: 00 00 00 00 00 00 00 00 00 0a 0e 38 30 30 80 22
    20: 30 c8 30 c8 f1 ff 01 00 00 00 00 00 00 00 00 00
    30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 04 00

    00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
    Subsystem: Acer Incorporated [ALI] Device 0102
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: [e0] Vendor Specific Information: Len=0c <?>
    Kernel driver in use: lpc_ich
    00: 86 80 b9 27 07 00 10 02 02 00 01 06 00 00 80 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 02 01
    30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00

    00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
    Subsystem: Acer Incorporated [ALI] Device 0102
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 18
    Region 0: I/O ports at 01f0
    Region 1: I/O ports at 03f4
    Region 2: I/O ports at 0170
    Region 3: I/O ports at 0374
    Region 4: I/O ports at 1880
    Kernel driver in use: ata_piix
    00: 86 80 df 27 05 00 80 02 02 8a 01 01 00 00 00 00
    10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
    20: 81 18 00 00 00 00 00 00 00 00 00 00 25 10 02 01
    30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00

    00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
    Subsystem: Acer Incorporated [ALI] Device 0102
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin B routed to IRQ 19
    Region 4: I/O ports at 18e0
    00: 86 80 da 27 01 00 80 02 02 00 05 0c 00 00 00 00
    10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20: e1 18 00 00 00 00 00 00 00 00 00 00 25 10 02 01
    30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00

    01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI M52 [Mobility Radeon X1300] (prog-if 00 [VGA controller])
    Subsystem: Acer Incorporated [ALI] Device 0102
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
    Region 1: I/O ports at 2000
    Region 2: Memory at c8100000 (32-bit, non-prefetchable) [size=64K]
    [virtual] Expansion ROM at c8120000 [disabled] [size=128K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Express (v1) Legacy Endpoint, MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
    ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
    ClockPM- Surprise- LLActRep- BwNot-
    LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+
    Address: 0000000000000000 Data: 0000
    Kernel driver in use: radeon
    00: 02 10 49 71 07 00 10 00 00 00 00 03 10 00 00 00
    10: 08 00 00 d0 01 20 00 00 00 00 10 c8 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 02 01
    30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00

    02:00.0 Ethernet controller: Atheros Communications Inc. Device abcd (rev 01)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at c0000000 (64-bit, non-prefetchable) [disabled] [size=128K]
    [virtual] Expansion ROM at c0020000 [disabled] [size=64K]
    Capabilities: [40] Power Management version 3
    Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable- Count=1/4 Maskable+ 64bit+
    Address: 0000000000000000 Data: 0000
    Masking: 00000000 Pending: 00000000
    Capabilities: [70] Express (v2) Endpoint, MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us
    ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 512 bytes
    DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
    LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <64us
    ClockPM- Surprise- LLActRep- BwNot-
    LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    DevCap2: Completion Timeout: Not Supported, TimeoutDis+
    DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
    LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
    LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
    EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
    Capabilities: [100 v1] Advanced Error Reporting
    UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
    UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
    CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
    CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
    AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
    Capabilities: [140 v1] Virtual Channel
    Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
    Arb: Fixed- WRR32- WRR64- WRR128-
    Ctrl: ArbSelect=Fixed
    Status: InProgress-
    VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
    Status: NegoPending- InProgress-
    Capabilities: [300 v1] Device Serial Number 00-00-00-00-00-00-00-00
    00: 8c 16 cd ab 00 00 10 00 01 00 00 02 10 00 00 00
    10: 04 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00

    0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    Subsystem: Acer Incorporated [ALI] Device 0102
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (8000ns min, 16000ns max)
    Interrupt: pin A routed to IRQ 17
    Region 0: I/O ports at 3000
    Region 1: Memory at c8300000 (32-bit, non-prefetchable)
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: 8139too
    00: ec 10 39 81 07 00 90 02 10 00 00 02 00 20 00 00
    10: 01 30 00 00 00 00 30 c8 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 02 01
    30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 20 40

    0a:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
    Subsystem: Acer Incorporated [ALI] Device 0102
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 168, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at c8301000 (32-bit, non-prefetchable) [size=4K]
    Bus: primary=0a, secondary=0b, subordinate=0e, sec-latency=176
    Memory window 0: cc000000-cfffffff (prefetchable)
    Memory window 1: d8000000-dbffffff
    I/O window 0: 00003400-000034ff
    I/O window 1: 00003800-000038ff
    BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
    16-bit legacy interface ports at 0001
    Kernel driver in use: yenta_cardbus
    00: 4c 10 39 80 07 00 10 02 00 00 07 06 10 a8 82 00
    10: 00 10 30 c8 a0 00 00 02 0a 0b 0e b0 00 00 00 cc
    20: 00 f0 ff cf 00 00 00 d8 00 f0 ff db 00 34 00 00
    30: fc 34 00 00 00 38 00 00 fc 38 00 00 0a 01 c0 05
    40: 25 10 02 01 01 00 00 00 00 00 00 00 00 00 00 00
    50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    0a:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
    Subsystem: Acer Incorporated [ALI] Device 0102
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at c8302000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: tifm_7xx1
    00: 4c 10 3b 80 06 00 10 02 00 00 80 01 10 39 80 00
    10: 00 20 30 c8 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 02 01
    30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 07 04

    0a:09.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller (prog-if 01)
    Subsystem: Acer Incorporated [ALI] Device 0094
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 57 (1750ns min, 1000ns max), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at c8300400 (32-bit, non-prefetchable)
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: sdhci-pci
    00: 4c 10 3c 80 06 00 10 02 00 01 05 08 10 39 80 00
    10: 00 04 30 c8 00 00 00 00 00 00 00 00 00 00 00 00
    20: 00 00 00 00 00 00 00 00 00 00 00 00 25 10 94 00
    30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 01 07 04
    Повторяю нужно пошаговое описание как установить драй2вера на не просто как некоторые пишут возьми драйвера здесь и дальше молчок или по незнанию или по неграмотности.
    Если бы пошаговое руководство было где на английском языке я бы не спрашивал.
    P.S. На ноуте нет интернета и Kali Linux грузится с флешки без возможности сохранения в образ результатов сеанса работы с Kali Linux (перзагрузка не катит !!!)
     
    #1275 rooker, 17 May 2018
    Last edited: 22 May 2018
  16. Archer393

    Archer393 New Member

    Joined:
    6 Oct 2016
    Messages:
    8
    Likes Received:
    1
    Reputations:
    0
    Ребята вопрос по инструменту Maltego, раньше когда сборка стояла старая несколько лет назад, то инструмент норм работал, тогда им не пользовался,но сейчас понадобился.В итоге когда запускаешь Maltego, то нету связи с сервером дополнений "Transform Hub". Переломатил весь инет в основном зарубежный, там говорили типа обнови java в итоге обновил, плюс расскоментируй строку с путем к java в файле конфигурации и так далее. Вчера мучился до утра в итоге не фига, версию смотрю через терминал и к ней путь прописываю + расскоментировал, переустанавливал, также устанавливал свежую с сайта и архива, результат ноль.

    [​IMG]
     
  17. Caniko

    Caniko New Member

    Joined:
    21 Jul 2018
    Messages:
    1
    Likes Received:
    0
    Reputations:
    0
    Всем приветосы!
    Подскажите с установкой: есть две флешки с Кали, после форматирования разделов одной из флешек через вторую и настройке её как USB с persistence, загружаюсь с флешки с USB persistence и получаю...пустую строку, ждущую ввода. Ждал не более 5 минут, ничего не происходит. Было у кого такое? Или подождать побольше?)
     
  18. GSLLL

    GSLLL New Member

    Joined:
    9 Dec 2015
    Messages:
    43
    Likes Received:
    2
    Reputations:
    0
    Всем привет. Прошу знатоков помочь. Можно ли, на сегодняшний момент, через Кали получить доступ к удаленному ПК с Windows (в первую очередь интересуют сервера - дедики) имея только IP адрес ПК? Если да, прошу дать подробный мануал, или ссылку на подобную тему, ну или же хотя бы схему (чтобы знать в каком направлении "копать"). Спасибо.
     
  19. joelblack

    joelblack Reservists Of Antichat

    Joined:
    6 Jul 2015
    Messages:
    244
    Likes Received:
    450
    Reputations:
    145
    Поставил Kali 2018.3a. Все было хорошо и отлично работало. Затем решил поставить последние обновы. В итоге Kali стала грузиться неприлично долго. Это был первый сигнал к тому,что где то образовались проблемы. После того, как я зашел в систему,я обнаружил что у меня отвалился частично рабочий стол. Перестали отображаться все файлы и папки,перестало работать выделение сеткой мышью нескольких объектов. Из консоли,благо, ко всему доступ остался.Кто то сталкивался с подобной проблемой?
    [​IMG]
     
  20. dmax0fw

    dmax0fw Level 8

    Joined:
    31 Dec 2017
    Messages:
    107
    Likes Received:
    131
    Reputations:
    46
    https://forum.antichat.ru/threads/58182/page-122#post-4244950
     
    joelblack likes this.