ох уже и не помню точно как было но неделю я промучился с флешки вроде ваще не хотело, потом диск и пошла установка, но когда установило вот такая была байда, причем я не могу себе поставить wifislax тоже на комп потому гружусь с флешки как на 1 раз
Посмотрите может у вас что-то в логах X-ов лежит "sudo cat /var/log/Xorg.*", потому как пока ничего что-бы указывало на ошибку не видно. Так откатите назад из под консоли "sudo apt remove firmware-amd-graphics libdrm-amdgpu1 ricks-amdgpu-utils xserver-xorg-video-amdgpu" и потом "sudo dpkg-reconfigure xserver-xorg"
змей изчез черный экран остался может .. если теперь по идее драйвер удалил - то кабель HDMI надо переключать на встроенное видео? или тут как в винде можно через стандартный .. сйчас попробую
ого многовато что то выводе то.. концовку отрежу... Spoiler: концовка [ 74.656] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 74.656] (**) Option "xkb_model" "pc105" [ 74.656] (**) Option "xkb_layout" "us,ru" [ 74.656] (**) Option "xkb_variant" "," [ 74.656] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll" [ 74.657] (II) event3 - Video Bus: is tagged by udev as: Keyboard [ 74.658] (II) event3 - Video Bus: device is a keyboard [ 74.658] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 74.658] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 74.658] (II) Using input driver 'libinput' for 'Power Button' [ 74.660] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 30 paused 0 [ 74.661] (**) Power Button: always reports core events [ 74.661] (**) Option "Device" "/dev/input/event1" [ 74.661] (**) Option "_source" "server/udev" [ 74.662] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 74.662] (II) event1 - Power Button: device is a keyboard [ 74.662] (II) event1 - Power Button: device removed [ 74.662] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 74.662] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 74.662] (**) Option "xkb_model" "pc105" [ 74.662] (**) Option "xkb_layout" "us,ru" [ 74.662] (**) Option "xkb_variant" "," [ 74.662] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll" [ 74.664] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 74.664] (II) event1 - Power Button: device is a keyboard [ 74.664] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 74.664] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 74.664] (II) Using input driver 'libinput' for 'Sleep Button' [ 74.668] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 31 paused 0 [ 74.668] (**) Sleep Button: always reports core events [ 74.668] (**) Option "Device" "/dev/input/event0" [ 74.668] (**) Option "_source" "server/udev" [ 74.669] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 74.669] (II) event0 - Sleep Button: device is a keyboard [ 74.671] (II) event0 - Sleep Button: device removed [ 74.671] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" [ 74.671] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 74.671] (**) Option "xkb_model" "pc105" [ 74.671] (**) Option "xkb_layout" "us,ru" [ 74.671] (**) Option "xkb_variant" "," [ 74.671] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll" [ 74.672] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 74.672] (II) event0 - Sleep Button: device is a keyboard [ 74.674] (II) config/udev: Adding input device CHESEN PS2 to USB Converter (/dev/input/event6) [ 74.674] (**) CHESEN PS2 to USB Converter: Applying InputClass "libinput keyboard catchall" [ 74.674] (II) Using input driver 'libinput' for 'CHESEN PS2 to USB Converter' [ 74.677] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 32 paused 0 [ 74.677] (**) CHESEN PS2 to USB Converter: always reports core events [ 74.677] (**) Option "Device" "/dev/input/event6" [ 74.677] (**) Option "_source" "server/udev" [ 74.679] (II) event6 - CHESEN PS2 to USB Converter: is tagged by udev as: Keyboard [ 74.679] (II) event6 - CHESEN PS2 to USB Converter: device is a keyboard [ 74.679] (II) event6 - CHESEN PS2 to USB Converter: device removed [ 74.679] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:0A81:0205.0002/input/input6/event6" [ 74.679] (II) XINPUT: Adding extended input device "CHESEN PS2 to USB Converter" (type: KEYBOARD, id 10) [ 74.679] (**) Option "xkb_model" "pc105" [ 74.679] (**) Option "xkb_layout" "us,ru" [ 74.679] (**) Option "xkb_variant" "," [ 74.679] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll" [ 74.681] (II) event6 - CHESEN PS2 to USB Converter: is tagged by udev as: Keyboard [ 74.681] (II) event6 - CHESEN PS2 to USB Converter: device is a keyboard [ 74.683] (II) config/udev: Adding input device CHESEN PS2 to USB Converter Mouse (/dev/input/event7) [ 74.683] (**) CHESEN PS2 to USB Converter Mouse: Applying InputClass "libinput pointer catchall" [ 74.683] (II) Using input driver 'libinput' for 'CHESEN PS2 to USB Converter Mouse' [ 74.685] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 33 paused 0 [ 74.685] (**) CHESEN PS2 to USB Converter Mouse: always reports core events [ 74.685] (**) Option "Device" "/dev/input/event7" [ 74.685] (**) Option "_source" "server/udev" [ 74.688] (II) event7 - CHESEN PS2 to USB Converter Mouse: is tagged by udev as: Mouse [ 74.688] (II) event7 - CHESEN PS2 to USB Converter Mouse: device is a pointer [ 74.688] (II) event7 - CHESEN PS2 to USB Converter Mouse: device removed [ 74.689] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:0A81:0205.0003/input/input7/event7" [ 74.689] (II) XINPUT: Adding extended input device "CHESEN PS2 to USB Converter Mouse" (type: MOUSE, id 11) [ 74.689] (**) Option "AccelerationScheme" "none" [ 74.689] (**) CHESEN PS2 to USB Converter Mouse: (accel) selected scheme none/0 [ 74.689] (**) CHESEN PS2 to USB Converter Mouse: (accel) acceleration factor: 2.000 [ 74.689] (**) CHESEN PS2 to USB Converter Mouse: (accel) acceleration threshold: 4 [ 74.691] (II) event7 - CHESEN PS2 to USB Converter Mouse: is tagged by udev as: Mouse [ 74.691] (II) event7 - CHESEN PS2 to USB Converter Mouse: device is a pointer [ 74.692] (II) config/udev: Adding input device CHESEN PS2 to USB Converter Mouse (/dev/input/mouse1) [ 74.692] (II) No input driver specified, ignoring this device. [ 74.692] (II) This device may have been added with another device file. [ 74.693] (II) config/udev: Adding input device CHESEN PS2 to USB Converter System Control (/dev/input/event8) [ 74.693] (**) CHESEN PS2 to USB Converter System Control: Applying InputClass "libinput keyboard catchall" [ 74.693] (II) Using input driver 'libinput' for 'CHESEN PS2 to USB Converter System Control' [ 74.695] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 34 paused 0 [ 74.695] (**) CHESEN PS2 to USB Converter System Control: always reports core events [ 74.695] (**) Option "Device" "/dev/input/event8" [ 74.695] (**) Option "_source" "server/udev" [ 74.697] (II) event8 - CHESEN PS2 to USB Converter System Control: is tagged by udev as: Keyboard [ 74.698] (II) event8 - CHESEN PS2 to USB Converter System Control: device is a keyboard [ 74.698] (II) event8 - CHESEN PS2 to USB Converter System Control: device removed [ 74.698] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:0A81:0205.0003/input/input8/event8" [ 74.698] (II) XINPUT: Adding extended input device "CHESEN PS2 to USB Converter System Control" (type: KEYBOARD, id 12) [ 74.698] (**) Option "xkb_model" "pc105" [ 74.698] (**) Option "xkb_layout" "us,ru" [ 74.698] (**) Option "xkb_variant" "," [ 74.698] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll" [ 74.700] (II) event8 - CHESEN PS2 to USB Converter System Control: is tagged by udev as: Keyboard [ 74.700] (II) event8 - CHESEN PS2 to USB Converter System Control: device is a keyboard [ 74.701] (II) config/udev: Adding input device CHESEN PS2 to USB Converter Consumer Control (/dev/input/event9) [ 74.701] (**) CHESEN PS2 to USB Converter Consumer Control: Applying InputClass "libinput keyboard catchall" [ 74.701] (II) Using input driver 'libinput' for 'CHESEN PS2 to USB Converter Consumer Control' [ 74.704] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 35 paused 0 [ 74.704] (**) CHESEN PS2 to USB Converter Consumer Control: always reports core events [ 74.704] (**) Option "Device" "/dev/input/event9" [ 74.704] (**) Option "_source" "server/udev" [ 74.705] (II) event9 - CHESEN PS2 to USB Converter Consumer Control: is tagged by udev as: Keyboard [ 74.705] (II) event9 - CHESEN PS2 to USB Converter Consumer Control: device is a keyboard [ 74.706] (II) event9 - CHESEN PS2 to USB Converter Consumer Control: device removed [ 74.706] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:0A81:0205.0003/input/input9/event9" [ 74.706] (II) XINPUT: Adding extended input device "CHESEN PS2 to USB Converter Consumer Control" (type: KEYBOARD, id 13) [ 74.706] (**) Option "xkb_model" "pc105" [ 74.706] (**) Option "xkb_layout" "us,ru" [ 74.706] (**) Option "xkb_variant" "," [ 74.706] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll" [ 74.707] (II) event9 - CHESEN PS2 to USB Converter Consumer Control: is tagged by udev as: Keyboard [ 74.708] (II) event9 - CHESEN PS2 to USB Converter Consumer Control: device is a keyboard [ 74.708] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event4) [ 74.708] (II) No input driver specified, ignoring this device. [ 74.708] (II) This device may have been added with another device file. [ 74.709] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event5) [ 74.709] (**) 2.4G Mouse: Applying InputClass "libinput pointer catchall" [ 74.709] (II) Using input driver 'libinput' for '2.4G Mouse' [ 74.712] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 36 paused 0 [ 74.712] (**) 2.4G Mouse: always reports core events [ 74.712] (**) Option "Device" "/dev/input/event5" [ 74.712] (**) Option "_source" "server/udev" [ 74.714] (II) event5 - 2.4G Mouse: is tagged by udev as: Mouse [ 74.714] (II) event5 - 2.4G Mouse: device is a pointer [ 74.714] (II) event5 - 2.4G Mouse: device removed [ 74.714] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:1EA7:0064.0001/input/input5/event5" [ 74.714] (II) XINPUT: Adding extended input device "2.4G Mouse" (type: MOUSE, id 14) [ 74.715] (**) Option "AccelerationScheme" "none" [ 74.715] (**) 2.4G Mouse: (accel) selected scheme none/0 [ 74.715] (**) 2.4G Mouse: (accel) acceleration factor: 2.000 [ 74.715] (**) 2.4G Mouse: (accel) acceleration threshold: 4 [ 74.716] (II) event5 - 2.4G Mouse: is tagged by udev as: Mouse [ 74.716] (II) event5 - 2.4G Mouse: device is a pointer [ 74.717] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/mouse0) [ 74.717] (II) No input driver specified, ignoring this device. [ 74.717] (II) This device may have been added with another device file. [ 74.718] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event12) [ 74.718] (II) No input driver specified, ignoring this device. [ 74.718] (II) This device may have been added with another device file. [ 74.718] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event13) [ 74.718] (II) No input driver specified, ignoring this device. [ 74.718] (II) This device may have been added with another device file. [ 74.718] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event14) [ 74.718] (II) No input driver specified, ignoring this device. [ 74.718] (II) This device may have been added with another device file. [ 74.719] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event15) [ 74.719] (II) No input driver specified, ignoring this device. [ 74.719] (II) This device may have been added with another device file. [ 74.719] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event16) [ 74.719] (II) No input driver specified, ignoring this device. [ 74.719] (II) This device may have been added with another device file. [ 74.719] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event17) [ 74.720] (II) No input driver specified, ignoring this device. [ 74.720] (II) This device may have been added with another device file. [ 74.720] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event18) [ 74.720] (II) No input driver specified, ignoring this device. [ 74.720] (II) This device may have been added with another device file. [ 74.720] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event19) [ 74.720] (II) No input driver specified, ignoring this device. [ 74.720] (II) This device may have been added with another device file. [ 74.721] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event20) [ 74.721] (II) No input driver specified, ignoring this device. [ 74.721] (II) This device may have been added with another device file. [ 74.721] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event21) [ 74.721] (II) No input driver specified, ignoring this device. [ 74.721] (II) This device may have been added with another device file. [ 74.721] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event22) [ 74.721] (II) No input driver specified, ignoring this device. [ 74.721] (II) This device may have been added with another device file. [ 74.722] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event23) [ 74.722] (II) No input driver specified, ignoring this device. [ 74.722] (II) This device may have been added with another device file. [ 74.722] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event24) [ 74.722] (II) No input driver specified, ignoring this device. [ 74.722] (II) This device may have been added with another device file. [ 74.722] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event25) [ 74.722] (II) No input driver specified, ignoring this device. [ 74.722] (II) This device may have been added with another device file. [ 74.723] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event26) [ 74.723] (II) No input driver specified, ignoring this device. [ 74.723] (II) This device may have been added with another device file. [ 74.723] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event11) [ 74.723] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall" [ 74.723] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys' [ 74.726] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 37 paused 0 [ 74.726] (**) Eee PC WMI hotkeys: always reports core events [ 74.726] (**) Option "Device" "/dev/input/event11" [ 74.726] (**) Option "_source" "server/udev" [ 74.727] (II) event11 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard [ 74.727] (II) event11 - Eee PC WMI hotkeys: device is a keyboard [ 74.727] (II) event11 - Eee PC WMI hotkeys: device removed [ 74.727] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input11/event11" [ 74.728] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 15) [ 74.728] (**) Option "xkb_model" "pc105" [ 74.728] (**) Option "xkb_layout" "us,ru" [ 74.728] (**) Option "xkb_variant" "," [ 74.728] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll" [ 74.729] (II) event11 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard [ 74.729] (II) event11 - Eee PC WMI hotkeys: device is a keyboard [ 74.729] (II) config/udev: Adding input device PC Speaker (/dev/input/event10) [ 74.729] (II) No input driver specified, ignoring this device. [ 74.729] (II) This device may have been added with another device file. [ 76.518] (--) intel(0): HDMI max TMDS frequency 225000KHz [ 77.538] (--) intel(0): HDMI max TMDS frequency 225000KHz [ 81.247] (--) intel(0): HDMI max TMDS frequency 225000KHz [ 439.581] (II) intel(0): EDID vendor "GSM", prod id 1 [ 439.582] (II) intel(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 439.582] (II) intel(0): Using EDID range info for horizontal sync [ 439.582] (II) intel(0): Using EDID range info for vertical refresh [ 439.582] (II) intel(0): Printing DDC gathered Modelines: [ 439.582] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 439.582] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 439.582] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 439.582] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 439.582] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 439.582] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 439.582] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 439.582] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 439.582] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e) [ 439.582] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 439.582] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 439.582] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e) [ 439.582] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 439.582] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 439.582] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 439.582] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 439.582] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 439.583] (--) intel(0): HDMI max TMDS frequency 225000KHz [ 470.408] (**) Option "fd" "26" [ 470.408] (II) event2 - Power Button: device removed [ 470.408] (**) Option "fd" "29" [ 470.408] (II) event3 - Video Bus: device removed [ 470.408] (**) Option "fd" "30" [ 470.408] (II) event1 - Power Button: device removed [ 470.408] (**) Option "fd" "31" [ 470.408] (II) event0 - Sleep Button: device removed [ 470.408] (**) Option "fd" "32" [ 470.408] (II) event6 - CHESEN PS2 to USB Converter: device removed [ 470.408] (**) Option "fd" "33" [ 470.408] (II) event7 - CHESEN PS2 to USB Converter Mouse: device removed [ 470.408] (**) Option "fd" "34" [ 470.408] (II) event8 - CHESEN PS2 to USB Converter System Control: device removed [ 470.408] (**) Option "fd" "35" [ 470.408] (II) event9 - CHESEN PS2 to USB Converter Consumer Control: device removed [ 470.408] (**) Option "fd" "36" [ 470.408] (II) event5 - 2.4G Mouse: device removed [ 470.412] (**) Option "fd" "37" [ 470.412] (II) event11 - Eee PC WMI hotkeys: device removed [ 470.413] (II) UnloadModule: "libinput" [ 470.413] (II) systemd-logind: releasing fd for 13:75 [ 470.426] (II) UnloadModule: "libinput" [ 470.426] (II) systemd-logind: releasing fd for 13:69 [ 470.440] (II) UnloadModule: "libinput" [ 470.440] (II) systemd-logind: releasing fd for 13:73 [ 470.690] (II) UnloadModule: "libinput" [ 470.690] (II) systemd-logind: releasing fd for 13:72 [ 470.742] (II) UnloadModule: "libinput" [ 470.742] (II) systemd-logind: releasing fd for 13:71 [ 470.778] (II) UnloadModule: "libinput" [ 470.778] (II) systemd-logind: releasing fd for 13:70 [ 470.810] (II) UnloadModule: "libinput" [ 470.810] (II) systemd-logind: releasing fd for 13:64 [ 470.822] (II) UnloadModule: "libinput" [ 470.822] (II) systemd-logind: releasing fd for 13:65 [ 470.846] (II) UnloadModule: "libinput" [ 470.846] (II) systemd-logind: releasing fd for 13:67 [ 470.862] (II) UnloadModule: "libinput" [ 470.862] (II) systemd-logind: releasing fd for 13:66 [ 470.900] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error [ 470.900] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error [ 470.900] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error [ 470.985] (II) Server terminated successfully (0). Closing log file. root@DartVHL:~#
а вот интересно, есть тут люди которые брутят через ферму? Там то походу вообще только отлетают пароли)) нет? ) в Евсу накидать видюх - бешенная мощь вообще получиться наверное))
почти сразу дописал. неееее.. )) музыку я для звука имел в виду прост. потому что маломерки в виде - есть картинка, но нет звука меня не устраивает, да и думаю большинство тут, поэтому лучше на встроенной но со звуком чем на лучшей, но без.. Вот думаю да гадаю что ж не так то... модуль Alsa показывал что устройство есть - включено но звук не прибавляется и не добавляется в основные устройства вывода(( капец короч.)) делал по https://www.linux.org.ru/forum/linux-hardware/14726923 отсюда и полезли косяки с загрузкой.
Надо не спешить,подсобирать деньжат и купить 2080ti (730К h/s). У меня Radeon HD 7850 и не успеваю ни за кем.Преходится ждать пока топы на форуме лягут поспать так сказать . Не забывай про БП.
Подсобирать? Еще столько же? ИМХО Я в этом сильно не разбираюсь, да простят меня боги перебора, но если для брута то я бы советовал две GeForce GTX 1070, цена должна быть в районе 45000 за 2 штуки, скорость перебора под 320000 паролей в секунду с одной видеокарты.
Я если честно не в курсе, сам не с России, нашел в яндекс маркете что самая дешевая стоит 27000, да ошибся действительно, это под 55000 а не 45000, виноват. За эту цену можно взять одну 1080 Ti, скорость перебора под 520000.
да ничего особенного, дрова на обе карты и стоковый хэшкэт, там запускаете Code: hashcat -I он вам выдаст карты которые видит в системе.
В эту плату,вторую карту можно воткнуть только через рэйзер (переходник) и придётся выносить её из корпуса. Всё зависит от серьёзности намерений.Бери одну,самую ядрёную.Для начала может и хватит.Ну а там поймёшь,надо оно тебе что-то болшее или нет.
