Интерфейс Pineapple должен проверять запущены ли процессы модулей, некоторые комманды не отрабатывают на новой прошивке, надо править в файлах!
Я не нашел в php-ах таких конструкций (ps aux, ps -all, ps auxww), может не там искал. Где они находятся? P.S. Сегодня купил донора, буду лепить внешнюю антену.
Вот что получилось - * Материал взят от сюда - http://diynews.info/page/elegantnoe-podkljuchenie-vneshnej-antenny-k-tp-link-tl-wr703n
Просто антенну прикрутить большого эффекта не даст. Если гонитесь за большим покрытием то лучше добавить активный усилитель сигнала.
как сказал TR0J@N "Просто антенну прикрутить большого эффекта не даст" после месяца пердоленья есть опыт для освоения шайтан аппарата mr3020, скажу честно не дал рады установить как описано на первой странице, но используя ссылку "http://samiux.blogspot.hk/2013/05/howto-tp-link-tl-mr3020-as-wifi.html" я смог установить одинаково просто как Pineapple 2.8.1 так и 3.0.0
Че то не получается grep -lr -e ‘ps aux’ * | xargs sed -i ‘s/ps aux/ps/g’ grep -lr -e ‘ps -all’ * | xargs sed -i ‘s/ps -all/ps/g’ grep -lr -e ‘ps auxww’ * | xargs sed -i ‘s/ps auxww/ps/g’ что делать то, команды не выполняются и что за файл надо править. после экрана приветствия при нажатии у меня на веб интерфейсе черный экран с часами и датой. Помогите плиз
перед звездочкой надо вписать папку выглядит так если ставили по первому посту grep -lr -e 'ps auxww' /pineapple/* | xargs sed -i 's/ps auxww/ps/g' grep -lr -e 'ps aux' /pineapple/* | xargs sed -i 's/ps aux/ps/g' grep -lr -e 'ps -all' /pineapple/* | xargs sed -i 's/ps -all/ps/g'
Спасибо ridman Теперь не запускается карма, при замене hostapd и hostapd_cli пропадает wifi, что посоветуете и надо ли их заменять при запуске root@OpenWrt:~# karma --help init_pcap: pcap_open_live: --help: No such device exists (SIOCGIFHWADDR: No such device)
ВСЕ ПОЛУЧИЛОСЬ ВСЕ ПОЛУЧИЛОСЬ ПО СПОСОБУ ОПИСАННОМУ samiux.blogspot.hk/2013/05/howto-tp-link-tl-mr3020-as-wifi.html Помогите как подключить 3G модем Хуавей МТС и ЮСБ флешку через хаб, также как подключить второй usb-wifi
Ау помогите Что то с модемом ни как, при включении в папке dev\ должно появится чтото типо ttyUSB*, и пакеты свтаил там все типо модем свич итд, не получается помогите плиз
Вот root@Pineapple:~# dmesg [ 0.000000] Linux version 3.3.8 (blogic@Debian-60-squeeze-64-minimal) (gcc ve rsion 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sun Nov 18 04:31 :55 UTC 2012 [ 0.000000] MyLoader: sysp=444ba8b5, boardp=5fbcaeef, parts=ebc66edc [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.00 0MHz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00000000 -> 0x00002000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00002000 [ 0.000000] On node 0 totalpages: 8192 [ 0.000000] free_area_init_node: node 0, pgdat 802ef060, node_mem_map 8100000 0 [ 0.000000] Normal zone: 64 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 8128 pages, LIFO batch:0 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 8128 [ 0.000000] Kernel command line: board=TL-MR3020 console=ttyATH0,115200 root fstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 29008k/32768k available (2209k kernel code, 3760k reserve d, 412k data, 212k init, 0k highmem) [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, No des=1 [ 0.000000] NR_IRQS:51 [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Mount-cache hash table entries: 512 [ 0.090000] NET: Registered protocol family 16 [ 0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79 [ 0.100000] MIPS: machine is TP-LINK TL-MR3020 [ 0.350000] bio: create slab <bio-0> at 0 [ 0.360000] Switching to clocksource MIPS [ 0.360000] NET: Registered protocol family 2 [ 0.370000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.370000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 0.370000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.380000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.390000] TCP reno registered [ 0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.400000] NET: Registered protocol family 1 [ 0.410000] PCI: CLS 0 bytes, default 32 [ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.430000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY ) (c) 2001-2006 Red Hat, Inc. [ 0.440000] msgmni has been set to 56 [ 0.440000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 54) [ 0.450000] io scheduler noop registered [ 0.450000] io scheduler deadline registered (default) [ 0.460000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UA RT [ 0.480000] console [ttyATH0] enabled, bootconsole disabled [ 0.490000] m25p80 spi0.0: found s25sl032a, expected m25p80 [ 0.500000] m25p80 spi0.0: s25sl032a (4096 Kbytes) [ 0.500000] 5 tp-link partitions found on MTD device spi0.0 [ 0.510000] Creating 5 MTD partitions on "spi0.0": [ 0.510000] 0x000000000000-0x000000020000 : "u-boot" [ 0.520000] 0x000000020000-0x000000109894 : "kernel" [ 0.520000] mtd: partition "kernel" must either start or end on erase block b oundary or be smaller than an erase block -- forcing read-only [ 0.540000] 0x000000109894-0x0000003f0000 : "rootfs" [ 0.540000] mtd: partition "rootfs" must either start or end on erase block b oundary or be smaller than an erase block -- forcing read-only [ 0.550000] mtd: partition "rootfs" set to be root filesystem [ 0.560000] mtd: partition "rootfs_data" created automatically, ofs=2E0000, l en=110000 [ 0.570000] 0x0000002e0000-0x0000003f0000 : "rootfs_data" [ 0.570000] 0x0000003f0000-0x000000400000 : "art" [ 0.580000] 0x000000020000-0x0000003f0000 : "firmware" [ 0.600000] ag71xx_mdio: probed [ 0.610000] eth0: Atheros AG71xx at 0xb9000000, irq 4 [ 1.160000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:00 [uid= 004dd041, driver=Generic PHY] [ 1.170000] TCP cubic registered [ 1.170000] NET: Registered protocol family 17 [ 1.180000] Bridge firewalling registered [ 1.180000] 8021q: 802.1Q VLAN Support v1.8 [ 1.190000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 1.200000] Freeing unused kernel memory: 212k freed [ 3.050000] Registered led device: tp-link:green:3g [ 3.050000] Registered led device: tp-link:green:wlan [ 3.050000] Registered led device: tp-link:green:lan [ 3.050000] Registered led device: tp-link:green:wps [ 5.160000] eth0: link up (100Mbps/Full duplex) [ 6.360000] JFFS2 notice: (442) jffs2_build_xattr_subsystem: complete buildin g xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 10 of xref (0 dead, 0 orphan) found. [ 7.010000] SCSI subsystem initialized [ 7.190000] usbcore: registered new interface driver usbfs [ 7.190000] usbcore: registered new interface driver hub [ 7.200000] usbcore: registered new device driver usb [ 7.750000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.760000] ehci-platform ehci-platform: Generic Platform EHCI Controller [ 7.770000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 7.800000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 [ 7.820000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 [ 7.820000] hub 1-0:1.0: USB hub found [ 7.820000] hub 1-0:1.0: 1 port detected [ 7.840000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.900000] Initializing USB Mass Storage driver... [ 7.910000] usbcore: registered new interface driver usb-storage [ 7.910000] USB Mass Storage support registered. [ 8.150000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 8.300000] hub 1-1:1.0: USB hub found [ 8.300000] hub 1-1:1.0: 4 ports detected [ 8.580000] usb 1-1.3: new high-speed USB device number 3 using ehci-platform [ 8.690000] scsi0 : usb-storage 1-1.3:1.0 [ 9.690000] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ : 0 ANSI: 2 [ 9.700000] sd 0:0:0:0: [sda] 3973120 512-byte logical blocks: (2.03 GB/1.89 GiB) [ 9.700000] sd 0:0:0:0: [sda] Write Protect is off [ 9.710000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 9.710000] sd 0:0:0:0: [sda] No Caching mode page present [ 9.720000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 9.730000] sd 0:0:0:0: [sda] No Caching mode page present [ 9.730000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 9.810000] sda: sda1 sda2 [ 9.820000] sd 0:0:0:0: [sda] No Caching mode page present [ 9.820000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 9.830000] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 29.370000] EXT4-fs (sda1): recovery complete [ 29.370000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 29.630000] eth0: link down [ 30.340000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gdda c993 [ 30.350000] Backport based on wireless-testing.git master-2012-09-07 [ 30.360000] compat.git: wireless-testing.git [ 30.470000] cfg80211: Calling CRDA to update world regulatory domain [ 30.480000] cfg80211: World regulatory domain updated: [ 30.480000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai n, max_eirp) [ 30.490000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm) [ 30.500000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 20 00 mBm) [ 30.510000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 20 00 mBm) [ 30.520000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm) [ 30.520000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm) [ 30.570000] cfg80211: World regulatory domain updated: [ 30.580000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai n, max_eirp) [ 30.590000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm) [ 30.590000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 20 00 mBm) [ 30.600000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 20 00 mBm) [ 30.610000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm) [ 30.620000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm) [ 31.360000] ath: EEPROM regdomain: 0x0 [ 31.360000] ath: EEPROM indicates default country code should be used [ 31.360000] ath: doing EEPROM country->regdmn map search [ 31.360000] ath: country maps to regdmn code: 0x3a [ 31.360000] ath: Country alpha2 being used: US [ 31.360000] ath: Regpair used: 0x3a [ 31.370000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 31.370000] Registered led device: ath9k-phy0 [ 31.370000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 [ 31.380000] cfg80211: Calling CRDA for country: US [ 31.380000] cfg80211: Regulatory domain changed to country: US [ 31.390000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gai n, max_eirp) [ 31.390000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 27 00 mBm) [ 31.400000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 17 00 mBm) [ 31.410000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm) [ 31.420000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm) [ 31.420000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 20 00 mBm) [ 31.430000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 30 00 mBm) [ 31.740000] PPP generic driver version 2.4.2 [ 32.010000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 32.130000] NET: Registered protocol family 24 [ 32.180000] nf_conntrack version 0.5.0 (456 buckets, 1824 max) [ 35.210000] eth0: link up (100Mbps/Full duplex) [ 36.600000] eth0: link down [ 36.600000] device eth0 entered promiscuous mode [ 37.210000] eth0: link up (100Mbps/Full duplex) [ 37.210000] br-lan: port 1(eth0) entered forwarding state [ 37.220000] br-lan: port 1(eth0) entered forwarding state [ 39.220000] br-lan: port 1(eth0) entered forwarding state [ 43.410000] device wlan0 entered promiscuous mode [ 43.500000] br-lan: port 2(wlan0) entered forwarding state [ 43.510000] br-lan: port 2(wlan0) entered forwarding state [ 45.510000] br-lan: port 2(wlan0) entered forwarding state [ 106.860000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform [ 106.980000] scsi1 : usb-storage 1-1.2:1.0 [ 106.990000] scsi2 : usb-storage 1-1.2:1.1 [ 107.390000] usb 1-1.2: USB disconnect, device number 4 [ 113.770000] usb 1-1.2: new high-speed USB device number 5 using ehci-platform root@Pineapple:~#
В меню pieapple вроде есть Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 001 Device 003: ID 0951:1603 Kingston Technology DataTraveler 1GB/2GB Pen Drive Bus 001 Device 005: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard
Вытащил и вставил модем [ 347.550000] usb 1-1.2: USB disconnect, device number 3 [ 358.800000] usb 1-1.2: new high-speed USB device number 5 using ehci-platform [ 358.910000] scsi1 : usb-storage 1-1.2:1.0 [ 358.930000] scsi2 : usb-storage 1-1.2:1.1 [ 359.330000] usb 1-1.2: USB disconnect, device number 5 [ 365.710000] usb 1-1.2: new high-speed USB device number 6 using ehci-platform
Да, странно, должно работать вроде. Было предположение, что как флешка определяется, но все верно. kmod-usb-serial установлен?
хз почему драйвер не грузится.... Выдерни модем. В файл /etc/modules.d/60-usb-serial добавь строку usbserial vendor=0x12d1 product=0x1506 далее сделай: rmmod usbserial insmod usbserial vendor=0x12d1 product=0x1506 Подключи модем, если ничего не поменялось, покажи файл /proc/bus/usb/devices и вывод команды dmesg | tail -n 30
Продолжение Обнулил пошивку openwrt (без pineapple) пытался поставить как www.foss.org.ua/lib/thread.so.663 не получается. Klaatu сделал как ты написал /proc/bus/usb/devices файл пуст. root@OpenWrt:~# ls /dev bsg mtd1 mtd5ro ppp sg1 ttyS12 ttyS7 bus mtd1ro mtdblock0 ptmx sg2 ttyS13 ttyS8 console mtd2 mtdblock1 pts shm ttyS14 ttyS9 full mtd2ro mtdblock2 random tty ttyS15 urandom kmsg mtd3 mtdblock3 sda ttyATH0 ttyS2 watchdog log mtd3ro mtdblock4 sda1 ttyS0 ttyS3 zero mem mtd4 mtdblock5 sda2 ttyS1 ttyS4 mtd0 mtd4ro null sdb ttyS10 ttyS5 mtd0ro mtd5 port sg0 ttyS11 ttyS6 root@OpenWrt:~# dmesg | tail -n 30 [ 70.810000] scsi 2:0:0:0: Direct-Access SD Storage 2.31 PQ: 0 ANSI: 2 [ 70.810000] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 70.830000] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 247.890000] usb 1-1.2: USB disconnect, device number 4 [ 562.610000] usbcore: registered new interface driver usbserial [ 562.610000] USB Serial support registered for generic [ 562.620000] usbcore: registered new interface driver usbserial_generic [ 562.630000] usbserial: USB Serial Driver core [ 836.590000] usbcore: deregistering interface driver usbserial_generic [ 836.590000] USB Serial deregistering driver generic [ 836.600000] usbcore: deregistering interface driver usbserial [ 847.380000] usbcore: registered new interface driver usbserial [ 847.380000] USB Serial support registered for generic [ 847.390000] usbcore: registered new interface driver usbserial_generic [ 847.390000] usbserial: USB Serial Driver core [ 853.620000] usbcore: deregistering interface driver usbserial_generic [ 853.620000] USB Serial deregistering driver generic [ 853.630000] usbcore: deregistering interface driver usbserial [ 856.030000] usbcore: registered new interface driver usbserial [ 856.040000] USB Serial support registered for generic [ 856.040000] usbcore: registered new interface driver usbserial_generic [ 856.050000] usbserial: USB Serial Driver core [ 885.090000] usb 1-1.2: new high-speed USB device number 5 using ehci-platform [ 885.200000] scsi3 : usb-storage 1-1.2:1.0 [ 885.210000] scsi4 : usb-storage 1-1.2:1.1 [ 886.200000] scsi 3:0:0:0: CD-ROM Mass Storage 2.31 PQ: 0 ANSI: 2 [ 886.200000] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 886.220000] scsi 4:0:0:0: Direct-Access SD Storage 2.31 PQ: 0 ANSI: 2 [ 886.220000] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 886.240000] sd 4:0:0:0: [sdb] Attached SCSI removable disk root@OpenWrt:~#
Судя по логу - что-то идет не так, драйвер не может загрузиться. Но при этом не пишет, что за ошибка Не знаю, что советовать дальше. Разве что, раз ты уже тронул прошивку, попробуй проапгрейдиться до релиз-версии attitude adjustment, если ты вдруг ставил rc2. На foss инструкция годная, все должно работать по ней, подставляй только свои значения там vendor=0x12d1 product=0x1506
Да вот косяк Ставил прошивку RC1 и RC2, результат один, может еще какая есть. Или дело в модеме (Хуавей 171 МТС) или хабе. В модеме отключал CD и SD, все равно таже тема. Что делать то. На всех ресурсах у всех получается. root@OpenWrt:~# dmesg | tail -n 30 [ 31.160000] cfg80211: Regulatory domain changed to country: US [ 31.160000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 31.170000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 31.180000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 31.190000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.200000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.200000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.210000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 31.460000] PPP generic driver version 2.4.2 [ 31.710000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 31.830000] NET: Registered protocol family 24 [ 31.880000] nf_conntrack version 0.5.0 (456 buckets, 1824 max) [ 35.620000] device eth0 entered promiscuous mode [ 36.440000] eth0: link up (100Mbps/Full duplex) [ 36.440000] br-lan: port 1(eth0) entered forwarding state [ 36.450000] br-lan: port 1(eth0) entered forwarding state [ 38.450000] br-lan: port 1(eth0) entered forwarding state [ 310.700000] usbcore: registered new interface driver usbserial [ 310.710000] USB Serial support registered for generic [ 310.710000] usbcore: registered new interface driver usbserial_generic [ 310.720000] usbserial: USB Serial Driver core [ 310.830000] USB Serial support registered for GSM modem (1-port) [ 310.830000] usbcore: registered new interface driver option [ 310.840000] option: v0.7.2:USB Driver for GSM modems [ 401.310000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform [ 401.420000] scsi1 : usb-storage 1-1.2:1.0 [ 401.420000] scsi2 : usb-storage 1-1.2:1.1 [ 402.420000] scsi 1:0:0:0: CD-ROM Mass Storage 2.31 PQ: 0 ANSI: 2 [ 402.430000] scsi 2:0:0:0: Direct-Access SD Storage 2.31 PQ: 0 ANSI: 2 [ 402.440000] sd 2:0:0:0: [sdb] Attached SCSI removable disk Вроде же видит модем
